Aqua Products Dash™ Robotic Above-Ground Pool Cleaner
Aqua Products Dash™ Robotic Above-Ground Pool Cleaner User Guides
Aqua Products Dash™ Robotic Above-Ground Pool Cleaner Frequently asked questions
Hmmm… Blinking lights could mean a few different things. Let's run through a quick list:
Is your cleaner out of water? If so, it's no wonder that those lights are blinking. Your cleaner can't do its job if it's not immersed in water!
Is the debris bag stuck on something? Your debris bags need room to expand so that they can collect all of the dirt and debris at the bottom of your pool. Check to make sure the bags aren't caught under the cover.
Or maybe the propellers are stuck. If the propellers aren't moving, neither is your cleaner, and this would definitely make your lights blink. A quick look should let you know if this is what’s going on. Once you've ID’d the culprit, you can restart your cleaner by pressing the power button one time. Your pool cleaner will pick back up cleaning your pool where it left off.
Well, that's annoying. Maybe just swim on the clean side? Just kidding! There are a few things you should try if your cleaner isn't covering the whole pool. Let's count them:
- How does your filter bag look? You want to make sure your filter bag is cleaned really thoroughly. If it’s dirty, it can cause your cleaner to become trapped, making it unable to clean your entire pool.
- Maybe your pool just needs a longer cycle to be fully cleaned. Try changing the timing cycle on the power supply.
- Can the axle area move freely? Make sure your axle isn’t clogged because a clogged axle will stop your cleaner from moving around.
- Have you checked the axle and turning pin configuration? The pin position controls the direction your cleaner moves, so it may just need an adjustment.
Check out each of these 4 possibilities until you figure out what's making your cleaner malfunction.
Oh no! Well, that just won't do. Did you remember to thoroughly clean the debris bags after you last cleaned your pool? A dirty bag or clogged ports can cause your cleaner to move sluggishly, so check to see if there's any dirt in the bag. Also check the suction ports to see if they’re backed up by leftover debris.
To ensure that the bags are always ready to clean and have space to hold debris, toss your debris bags into the washing machine every once in a while! Since they’re machine washable, just make sure you rinse off any twigs, leaves or other debris before throwing the bags into your machine. Oh, and only use cold water!
That’s no fun! Before you panic, make sure that you set up the unit and power supply right. Obviously, if things aren't put together the right way, the unit won't work how it should. If everything is put together right, check the propellers. Are they stuck? If the propellers aren't moving, your cleaner can’t move either. If neither of these suggestions fix the issue, try adjusting the two suction ports on the bottom of the unit.
Bummer! First, make sure there isn't anything blocking the cleaner underwater. You also want to check that the cleaner isn't stuck on any loose objects at the bottom of the pool, like pool toys — or the necklace you lost in the pool last week. If there aren't any blockages or obstructions, then your suction ports might be too close to the bottom of the pool. Adjust the suction ports so they’re a little higher off the ground. This will let your cleaner move around freely.
This is a super easy fix! Check out the axle and turning pin configuration. There’s an adjustable pin on each end of the axle, and it has a few options for its position. Each position affects the turning speed and angle of your cleaner. Adjusting the pin configuration will let your cleaner move in other directions so it can clean the whole pool. So, try switching the pin position to let the axle turn in different directions!
Coiled cables probably mean your cleaner is turning too sharply. And unless your pool is designed in the shape of 45-degree angles, there's really no reason for it to do this. Never fear. There's an easy solution for this one. Simply change up the axle setup to match the shape of your pool and make the axle turn more gradually!